How do I set my device to network connection status (Wi-Fi)?

There are two types of device network distribution, EZ Mode (quick flash) and AP Mode (slow flash) :
For most devices that have a reset button (refer to the product manual to find the reset button)

1.EZ Mode (quick flash) : Firstly, make sure that the device is powered off for more than 10 seconds, then power on the device. Next, press and hold the reset button on the device for about 5 seconds until the indicator of the device starts flashing quickly. Now the device enters EZ Mode. You can add the device now.

2.AP Mode (slow flash): There is no need to power off the device, but you need to press and hold the reset button on the device for about 5 seconds while the device's indicator is flashing fast, until the device's indicator starts to flash slowly, and the device enters AP Mode, You can add the device now.
For lighting equipment such as smart bulbs

1.EZ Mode (quick flash) :Firstly, make sure that the device is powered off for more than 10 seconds, then power on the device. Next, switch the power of the device three times (on-off-on-off-on, and the interval between each on and off needs 2 to 4 seconds). Wait for a while until the lighting device starts flashing quickly, and the device enters EZ Mode. You can add the device now.

2.AP Mode (slow flash): There is no need to power off the device, but you need to turn on and off the power of the device three times (on-off-on-off-on) while the lighting device is flashing fast (the interval between each on and off requires 2 to 4 seconds) . Wait for a moment until the lighting equipment starts to flash slowly, the device enters AP Mode. You can add the device now.